CAD Projects · Batch Automation · CaPro Engine
Automate Thousands of CAD Drawings. Save Hours of Repetitive Work.
CAD Automation Pro provides a standalone automation interface with integrated script creation and execution, so you can batch-process entire drawing sets in one run, with less repetitive drafting, higher productivity, and the potential to lower labor cost per drawing. Script and project editing work on their own; running scripts on your drawings requires a licensed AutoCAD 2018 or later.
CaPro Engine supports 573 commands. Average processing speed observed during testing: 11.5 drawings per second. Results vary with hardware, drawing complexity and operations.
In our test, 70,731 drawings were processed in 1 hour 42 minutes (about 11.5 per second) using a drawing cleanup script that runs 53 commands on every drawing, over 3.7 million commands in total, on a 32-thread workstation with AutoCAD 2027. Speed varies with hardware, drawings and script.
- 573commands · CaPro Engine
- 11.5/saverage drawings per second observed during testing; results vary with hardware, drawing complexity and operationsIn our test, 70,731 drawings were processed in 1 hour 42 minutes (about 11.5 per second) using a drawing cleanup script that runs 53 commands on every drawing, over 3.7 million commands in total, on a 32-thread workstation with AutoCAD 2027. Speed varies with hardware, drawings and script.
- <30 s17-slot PLC rack, 20 drawings
- 15 daysfree trial, no card
In our internal testing, CAD Automation Pro processed over 70,000 DWG drawings in under 2 hours.
In our test, 70,731 drawings were processed in 1 hour 42 minutes (about 11.5 per second) using a drawing cleanup script that runs 53 commands on every drawing, over 3.7 million commands in total, on a 32-thread workstation with AutoCAD 2027. Speed varies with hardware, drawings and script.
CAD Automation Pro is independent CAD automation software powered by the CaPro Engine. Drawing processing requires a licensed copy of AutoCAD 2018 or newer installed on the same PC. Electrical features also require AutoCAD Electrical.
Autodesk and AutoCAD are trademarks of Autodesk, Inc.; CAD Automation Pro is not affiliated with Autodesk.
Script used in the test (53 commands per drawing)
PICKSTYLE 0
XLOADCTL 2
XREFNOTIFY 0
DEMANDLOAD 3
CELTSCALE 1
PDMODE 0
CHAMFER D 0 0
DIMASO ON
DIMASZ .1
DIMLFAC 1
DIMTXT .1
DRAWORDERCTL 0
DYNMODE 0
GRID 0.25
GRID ON
ISAVEPERCENT 0
LAYEREVAL 0
LAYERNOTIFY 0
LAYOUTREGENCTL 0
LTSCALE 1
LWDEFAULT 25
MIRRTEXT 0
MSLTSCALE 1
ORTHO ON
SETVAR OSMODE 599
PALETTEOPAQUE 0
PSLTSCALE 0
-PURGE ALL * N -PURGE ALL * N
QPMODE 0
QTEXTMODE 0
REGENALL
REGENMODE 0
SELECTIONCYCLING 0
SELECTIONPREVIEW 3
(setvar "SNAPUNIT" (list 0.03125 0.03125))
(setvar "SNAPMODE" 0)
UCSICON OFF
VIEWRES Y 20000
TILEMODE 0 PSPACE
TILEMODE 1
LIMITS off
GRID ON
GRIDDISPLAY 4
TILEMODE 0 PSPACE
LIMITS off
GRID OFF
GRIDDISPLAY 4
DEFAULTGIZMO 3
TILEMODE 1
ZOOM E
-LWEIGHT 0.05
LWDISPLAY 0
TILEMODE 0 PSPACE
